ISO 13485:2016

Home / ISO 13485:2016
ISO EN 13485:2016 is the global harmonized Quality Management Systems Standard used by medical device manufacturers to meet certain requirements to support the safety and effectiveness of the products they sell into Europe. ISO EN 13485:2016 was publ... Read More

ISO EN 13485:2016 is the global harmonized Quality Management Systems Standard used by medical device manufacturers to meet certain requirements to support the safety and effectiveness of the products they sell into Europe. ISO EN 13485:2016 was published on 26th February 2016 and has now completed its transition period since April 2019.

This Standard specifies requirements for a Quality Management System (QMS) that can be used by an organisation involved in one or more stages of the life cycle of a medical device including the design & development, production, storage & distribution, installation, servicing & final decommissioning & disposal of medical devices.

It can be used by external parties to assess the organisations ability to meet customer & regulatory requirements or Notified Bodies can use this standard when assessing whether companies have a QMS, which supports the European Directive/Regulation requirements. Such an assessment is required where a manufacturer seeks to apply the CE mark. This means that personnel within this industry must be conversant in the ISO EN 13485:2016 requirements, if they are certified to this standard.

Collapse

What's covered?

Expand/Collapse Expand/Collapse
  • Course Objectives & Introduction
  • ISO 13485:2016 – all sections of ISO 13485:2016, with focus on the updates. This will be discussed in a discussion-based environment and using tutors experience with the Standard. This allows participants to interact and discuss their current systems / processes in operation, how well these meet the requirements or if there are any challenges they may be experiencing.

The tutor is experienced in auditing against this standard and so will share experiences on expectations and outcomes from this standard in practice.

Who should participate?

Expand/Collapse Expand/Collapse

The course is suitable for all personnel from medical device manufacturing or service/support industries who need to know the ISO 13485:2016 requirements or who may need a refresher of these requirements. Personnel who perform both internal audits or external audits on suppliers may also require this knowledge.

What will I learn?

Expand/Collapse Expand/Collapse

Participants will achieve the following learning outcomes from this programme;

  • Understanding the specific requirements of ISO EN 13485:2016 (including what new requirements have been included, what requirements have been removed, what remains the same)
  • Awareness of what auditors may look for

Who are the tutors?

Expand/Collapse Expand/Collapse

How do we train and support you?

Expand/Collapse Expand/Collapse

In-House Courses
Course tutor will contact your organisation in advance to discuss the programme in detail.
In-house courses can be customised to meet your organisation’s specific requirements.

NOTE: This course can be coupled with The Medical Device Regulation (CE Making Process & Key Updates) training program to run onsite as a two-day programme.

Course Manual
Delegates will receive a hardcopy course manual with relevant course materials.

Share this Programme

SnapshotSnapshot

Course Code
LS028
Duration
1 training day
Public Price
Virtual Training: €395
Delivery Mode
This programme is delivered by Classroom, Virtual Training, or In-Company training
stdClass Object
(
    [primary_category] => Quality Systems and Regulations
    [primary_slug] => quality-systems-and-regulations
    [categories_slugs] => Array
        (
            [0] => quality-systems-and-regulations
        )

    [parent_categories_slugs] => Array
        (
            [0] => life-sciences
        )

)

What Our Learner's SayWhat Our Learner's Say



Great job! Much appreciation for Bernie and Kevina.
Leona L March 5, 2024
Brilliant, looking forward to a fly through MDR tomorrow!!
nicola c March 5, 2024
Device classification , Rules can be added. Automation related GMP contents were missing. Risk management standard contents was high level
Thennarasu s December 15, 2023
Very good course, really enjoyable and would highly recommend this course for anyone looking to get an good understanding of the Medical Device industry and in particular the regulations and QMS importance of Medical Device Manufacturing.
Roisin K November 27, 2023

ISO 13485:2016

Duration: 1 day
Hide

ISO 13485:2016

Duration: 1 day
Virtual Training: €395
Hide
  • 07 Oct 2024
    Delivery: Virtual Training
    Location: Virtual
    Book Date